Strip building boat plans. strip building also known as cedar strip or plank building is a method of boat building where narrow strips of thin wood are glued together around a frame, the strips are then faired and fiberglassed and the form removed.. However, strip planking can be started from the keel depending on the particular design. planking which runs parallel to the sheer will look better if the boat is to be finished with the wood showing. and even when painted the planking run off might become visible with age.. Strip planking is a form of carvel planking. the hull is built over forms using strips of wood, edge-glued, and edge fastened together. the strips are kept narrow so that there is very little shaping required. strips are usually a minimum of 1/2″ thick, with a maximum width of 1 1/2 times the thickness..
Plans for building your own wooden kayak from scratch using the stitch-and-glue or cedar-strip method. cedar strip decked wood duck. attractive modern looking boats - a plywood hull combined with a cedar strip deck. light and easily removable outrigger floats that turn a canoe or kayak into a formidable sailing boat or a stable fishing. Support mike for maintaining the index.paypal: indexes now updated by mike report bad links or send comments to mike: about me. The pre-kit rowing/fishing boat package: strip building dvd, newfound woodworks' fiberglassing dvd, and woodstrip rowing craft by susan van leuven. this package will give you all the information you need to plan your boat building project..
