The clinker or "lapstrake" method is one of the oldest and most reliable methods of hull construction, and clinker built boats are quite popular. lean more about clinker boat plans and construction in this article.. Clinker (or lapstrake) construction involves the planking of the hull with adjacent planks slightly overlapping one another (in a stepped fashion). it is a method used in northern european countries for centuries and produces a hull with graceful, tapering curves to the planking which stand out to emphasize the shape of the boat.. The boat is suitable for any manner of pleasure use, and although not fast, it is a safe and stable little craft and a beautiful shape. lines plans and specification table are in the stock plan catalog. stern post detail. normally clinker boats are planked up over temporary molds with the frames fitted later..
Clinker is a method of constructing hulls of boats by fixing wooden planks so that the planks overlap along their edges. the overlapping joint is called a land. if the plank is too short for the hull, it would be necessary to extend the plank by joining with another piece of wood (xxx joints are common).. A clinker certainly has a slightly larger wetted area, but a carvel hull is not necessarily more efficient: for given hull strength, the clinker boat is lighter overall, so displaces less water than a heavily-framed carvel hull.. Boat size was limited by the fact that the planks had to run the length of the hull.* the overlapping planks were fixed to each other by * consequently, clinker building continued until a much later date for boats than for ships..
